eMotimo Dana Dolly integration instructions
11
Orientation #4
Mounting for original track ends, triangle track, top up
4.
Belt clamp mounts on bottom of track ends. Align left and
right with belt on Motor Mount. Use 1/4-20” thumbscrew to
lock down.
5)
Routing belt:
A) Wrap belt around #4 and #3 pegs. Pull up and
around #1 peg .
B) Tighten belt by pushing forward Tooth Clamp.
C) Lock in place by tightening down 1/4-20” thumb
screw.
1.
Wrap belt face down around pulley and under idlers.
2.
Slide Dana Dolly to one end and align Belt Clamp left
and right to align belt with Motor Mount.
3.
Lower belt slightly by adjusting thumbscrews on Motor
Mount. Adjust belt up and down to align with the top of
the #4 and #3 pegs. Lock down screws using tool.
B
A
C