eMotimo Dana Dolly integration instructions
13
Orientation #6
Mounting for universal track ends, round track, bottom up
B
A
C
1.
Wrap belt face down around pulley and under idlers.
2.
Slide Dana Dolly to one end and align Belt Clamp left
and right to align belt with Motor Mount.
3.
Lower belt slightly by adjusting thumbscrews on Motor
Mount. Adjust belt up and down to align with the bottom of
#1 peg. Lock down screws using tool.
4.
Belt clamp mounts on top of track ends. Align left and
right with belt on Motor Mount. Use 1/4-20” thumbscrew
to lock down.
5.
Routing belt:
A) Wrap belt under and around #1 peg. Pull up
and around #1 peg.
B) Tighten belt by pushing forward Tooth Clamp.
C) Lock in place by tightening down 1/4-20” thumb
screw.