32
eMotimo spectrum Instructions R007
3. Move Params:
a.
Rotate:
Press X to select the direction you would like spectrum to rotate in while
trigging your camera.
b.
Type:
Press X to select the style of movement you would like spectrum to perform
between rows. Refer to page 30 for details.
c.
Speed:
Press X to select the speed in which spectrum will move between frames.
With longer lenses, slower speed modes are recommended.
d.
Run:
Make sure your camera cable is plugged into spectrums camera port and your
camera shutter release port. Press X to run your move.
2. Extra Rows:
The default is one row of shots. If you are interested in adding rows, you can do so
here.
a.
Top Row:
If you want to shoot a row above where your starting point is, then press
X to highlight the Top Row prompt. Once selected, scroll up using the d-pad, to
select the number of degrees of upward angle you would like your top row to be
angled at above the starting point.
b.
Bottom Row:
If you want to shoot a row below where your starting point is, then
press X to highlight the Bottom Row prompt. Once selected, scroll up using the
d-pad, to select the number of degrees of downward angle you would like your
bottom row to be angled at below the starting point.
Summary of Contents for spectrum ST4
