Page 8
BAS
X
A
-100
BASX A-100 Rear Panel
4
6
5
7
1
3
2
8
1. Line Level Stereo Input
Use this input to connect any line level stereo source to the BASX A-100.
2. Loop Output
This is a line level output that delivers a duplicate of the input signal.
3. Speaker Outputs
The speaker outputs on the A-100 use heavy duty audiophile grade five-way binding posts. They
accept speaker cables terminated with banana plugs, spade lugs, or bare wire.
Note: The BasX A-100 works well with either 4 Ohm or 8 Ohm speakers.
4. AC Power Switch
Switches the main AC power to the A-100 On and Off.
Note: When the AC Power Switch is Off, the BASX A-100 will ALWAYS be Off (and will not
operate). When the AC Power Switch is On, operation of the BASX A-100 will depend on the
Trigger Switch setting. See
Triggering the BASX A-100
for details.
