Page 29
UMC-200
Troubleshooting
Problem: No power; amber halo light on the front panel of the UMC-200 is not lit.
• Verify that your power source is operating correctly.
• Verify that the Power switch on the rear panel of the UMC-200 is turned On.
Problem: No video.
• Verify that your source component and TV or monitor work
(connect them together directly).
• Check your HDMI cables and connectors.
• Verify that you have the correct Input selected on the UMC-200.
Problem: No audio with a video source
.
• Verify that you have configured the audio source for that input to be the same HDMI input
as the video source.
• If you are using a different audio source (such as a different output from a Blu-Ray player),
verify that the audio source you have configured is (still) active.
• Try re-selecting the Input. (If you were using Last Video Memory when you turned the
UMC-200 Off it will remain in effect when you turn the UMC-200 back on. If so, and the
video source you were using is still active, but the audio source is not, you may end up
with no audio.)
• Make sure the UMC-200 isn’t muted or turned all the way down.
• Make sure you don’t have headphones plugged in
(headphones will mute the main output).
• Check your interconnects, power amplifier(s), and speakers.
Problem: No audio with an audio-only source
.
• Make sure the UMC-200 isn’t muted or turned all the way down.
• Make sure you don’t have headphones plugged in
(headphones will mute the main output).
• Check your interconnects, power amplifier, and speakers.
Problem: The remote control doesn’t work (but everything else works as normal).
• Replace the batteries in the remote control.
• If the UMC-200 front panel is in direct sunlight, try moving it (sunlight can jam the signal).
• Look for other sources of IR signal noise that may interfere with the signal
(plasma TVs, certain CF or halogen lamps, and other sources of IR light).
If none of these simple suggestions eliminates your problem, please contact Emotiva Support,
at 1-877-EMO-TECH (1-877-366-8324), where a real live person will be happy to get you up
and running.
Summary of Contents for UMC-200
Page 1: ...umc 200 7 1 Home Theater Preamp Surround Processor User Manual umc 200...
Page 2: ......
Page 37: ...Page 32 UMC 200 Notes...
Page 38: ......