6) Product Settings
DIP switch allows to control the voltage provided at TV socket:
Voltage at TV socket
DIP switch lever 1
DIP switch lever 2
OFF (for passive antenna)
OFF
OFF
5 V (max. 100 mA)
ON
OFF
12 V (max. 100 mA)
OFF
ON
7) Safety
Observe these rules, if the device is connected to TV coaxial network:
Due to security reasons the product and wiring in which the product is
connected, must be grounded properly. Make sure the antennas are properly
protected against lightning. Connect all devices to power grid only after all
connections are finished and checked. Never work on the wiring (including
satellite and terrestrial receivers, TVs) during or before a storm. A lightning
stroke into the antenna may cause dangerous overvoltage in the product
metallic parts.
8) Product Maintenance
Always disconnect the product from the power grid and wiring before
performing any maintenance of the product. If you have to enter places with
a risk of fall, pay attention to your safety.
Use only dry cloth to clean the
product and do not use any liquid agents. Coaxial cables installed outdoors should
be replaced once in a few years. Unscrew all F connectors and clean connector
contacts, resp. shorten the coaxial cable by approx. 2 cm, every 2 years.
9) Troubleshooting
If there is no or remarkably slow data link, disconnect for awhile power supply.
10) Symbols Explanation
certificate of conformity
According to EU directive, electric and electronic devices which are identified by
one of the following symbols must not be disposed of together with municipal
waste. When disposing of the old device, use local waste collection and
separation systems.
3 of 4
