Examples of setting of generator G1/1ECNman-1:
choice of sat. position B
(second LNB)
levers setting:
opt OFF
pos ON
pol, band OFF
choice of sat. position C
(third LNB)
levers setting:
opt ON
pos OFF
pol, band OFF
choice of sat. position D
(fourth LNB)
levers setting:
opt ON
pos ON
pol, band OFF
Dear Customer,
congratulations on the purchase of the EMP-Centauri product. Before its installation and putting
into operation, read carefully the entire operation manual. Keep the purchase and rework (if any)
records for future need.
1 The area of application, warranty
The product is designed for distributing satellite, terrestrial TV and radio signals.
We
recommend the device to be installed and serviced by the qualified technician.
EMP-Centauri
ECONOMY CLASS products are covered under warranty for up to 4 (four) years from the date
of purchase. The warranty shall not apply to the product used for other than specified purpose.
The user will be responsible for injury or material damage which may arise in consequence of
any product use in contradiction with the manual. It is prohibited and unlawful to dismantle the
product and make any interventions in it. Repairs of the product may be performed only by EMP-
Centauri company, or other companies authorized by EMP-Centauri.
2 Technical specifications
1in/1out DiSEqC 1.0 generators. Generators are controlled by means of DC voltage on 4 cinch
(RCA) sockets (0/12 V DC, G1/1ECN-1) or 4 manual flip-flop switches (G1/1ECNman-1).
SPECIFICATIONS
G1/1ECN-1
G1/1ECNman-1
Number of inputs
1
Number of outputs
1
Frequency range
SAT 950-2150 MHz
Insertion loss (avg)
SAT 2 dB
Current consumption (avg)
40 mA (18 V DC) from receiver
Dimensions (w,d,h)
7.6 x 4.4 x 2.8 cm
7.6 x 3.6 x 4.3 cm
Temperature range
–25 °C - +60 °C
3 Product takeover
Make sure that the product is not damaged. In the case of damage please contact your dealer.
4 Product storing and installations
The product must not be stored and installed
•
in the place with excessive humidity,
•
in the place with dropping or running water,
•
in the place with high dust pollution, mechanical vibrations or impacts,
•
in the place out of temperature limits specified in the section 2 Technical specifications,
INSTRUCTION MANUAL
1/002903 B
G1/1ECN-1
G1/1ECNman-1
Contact
EMP-Centauri s.r.o.
5. kvetna 690
339 01 Klatovy 1
Czech Republic
tel: (+420) 376 314 852
fax: (+420) 376 314 367
info@emp-centauri.eu
www.emp-centauri.eu
návod k použití
G1/1ECN-1, G1/1ECNman-1 CZ
stav změny
: B
datum : 16. 2. 2011
FQ 7.3-1_027
vypracoval : P. Hajčiar přezkoušel : J. Pernikl schválil : M. Váňa
podpis :
podpis :
podpis :
1 of 4
4 of 4
