Instruction Manual
V17 1003962-EN A
T5/10PNP-3
T4/8PNN-3
T5/10PCA-3
T4/8PCN-3
Dear Customer,
congratulations on the purchase of the EMP-Centauri product. Before its installation and putting into
operation, read carefully the entire operation manual. Keep the purchase and rework (if any) records for
future need.
1) Field of Application, Warranty
The product is designed for the distribution of satellite (SAT) and terrestrial (TERR), TV and radio signals.
EMP-Centauri's PROFI CLASS products are covered under 6 (six) years warranty from the date of
purchase. The warranty shall not apply to the product used for other than the specified purpose. The user
will be responsible for injury or material damage which may arise in consequence of any product use in
contradiction with the manual. Repairs or any interventions in the product may be performed only by EMP-
Centauri company, or other companies authorized by EMP-Centauri.
2) Technical Specifications
T5/10PNP-3 is a passive splitter for 4 SAT IF + 1 terr. coaxial leads.
T5/10PCA-3 is an active splitter for 4 SAT IF + 1 terr. coaxial leads.
T4/8PNN-3 is a passive splitter for 4 SAT IF coaxial leads.
T4/8PCN-3 is an active splitter for 4 SAT IF coaxial leads.
Satellite lines pass through DC from straight outputs to inputs. Side outputs and terrestrial line (if exists) is
DC blocked.
Splitters are mechanically designed to allow stacking into a compact multi-satellite splitting block.
Specifications
T5/10PNP-3
T5/10PCA-3
T4/8PNN-3
T4/8PCN-3
Number of Inputs
5
4
Number of Outputs
10
8
Frequency Range
TERR 5–862 MHz
TERR 48–862 MHz
—
SAT 950–2300 MHz
Insertion Loss (avg)
TERR / SAT 5 dB
TERR / SAT 0 dB
SAT 5 dB
SAT 0 dB
Isolation SAT (min)
35 dB (between SAT splitters), 13 dB (between outputs of any SAT splitter)
Isolation outputs TERR (min) 10 dB
6 dB
—
Maximum signal level*
—
95 dBuV
—
95 dBuV
Current consumption (from
coaxial cables, total)
—
100 mA
—
40 mA
1 of 4
