background image

Warranty

Engineered Music Products “EMP Tek” warrants the VT-40.2 integrated tube ampli-

fier (the "Product") to be free from original manufacturing defects in materials and 

workmanship for one (1) year from date of purchase from an authorized EMP Tek 

reseller. This warranty extends only to the original consumer purchaser. EMP Tek does 

not warrant goods used in industrial applications. This warranty does not cover any 

expenses incurred in any removal or re-installation of the product.
If the product should prove defective within the warranty period, contact EMP Tek 

for a return authorization number prior to returning the product by prepaid delivery 

to EMP Tek, along with the original sales invoice or other proof of purchase, which 

establishes eligibility for warranty service. EMP Tek will, at its option, replace or repair 

the product free of charge and return the product by prepaid delivery. This warranty 

does not apply to any product which has been damaged, misused, altered, neglected or 

repaired by anyone other than an EMP Tek authorized service facility. 
Any implied warranties including fitness for use and merchantability are limited in 

duration to the period of the express warranties set forth above, and no person is 

authorized to assume for EMP Tek any other liability in connection with the sale of 

the product. EMP Tek expressly disclaims liability for any incidental and consequential 

damages caused by the product or the result of failure of this product. The remedies 

provided under this warranty are exclusive and in lieu of all others.
This warranty gives specific legal rights. In addition, there may be other legal rights 

arising from the sale of the product, which vary from state to state. Some states do not 

allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation or exclusion may not apply in some areas.
Extended warranty available at 

www.emptek.com/extendwarranty.php

9

Summary of Contents for VT-40.2













Reviews: