39
Item
Patio Heater
Serial No:
Model
HMXD-A
Country
Destination
CH-ES-FR-GB-GR-IE-IT
-PT-CY-LT-LU-LV-SK-SI
IS-NL-NO-DK-FI-SE-BE
-CZ-RO-CY-HR-TR-BG-MT
AT-DE-SK
-CH-NL-LU
PL
Type of gas
butane
Pressure(mbar)
28-30
37
29
category
I
3+(28-30/37)
I
3B/P(30)
I
3B/P(50)
I
3B/P(37)
Qn (Hs)
14.0 kW
Manufacturer
Butane/propane
propane
Propane/Butane
PIN Number
0063CM7084
1018g/hr
Empasa GmbH, Im Herrmannshof 10, D-91595 Burgoberbach
50
37
V1/2018-EM-Classic
Saftey information
Ÿ
Ÿ
Never use the gas heater if the glass tube has cracks
Always ensure that the gas heater is stable. The glass tube may break if the gas heater falls over
Gas requirements
Ÿ
Ÿ
The maximum inlet pressure of control must not exceed 100psi (6.89 bar)
Ÿ
The pressure control and the hose assembly unit that must be used have to meet regional standards.
Ÿ
Use the proper pressure control, meeting the regional requirements and specifications as specified on page 5 of this
manual.
Ÿ
Assembly must meet the regional requirements. If such requirements do not exist, implement the respectively defined
standards for storage and handling of liquid gases.
Ÿ
Dented, rusty or damaged propane gas bottles can pose a danger and must be verified by gas bottle supplier.
Ÿ
Never use propane gas bottles with damages valve connector.
Ÿ
The propane gas bottle must be configured as to allow for gas extraction from the actual gas bottle in use.
Ÿ
Never connect an unregulated propane bottle to the gas heater.
Ÿ
The rubber hose connecting the control with the inlet must not exceed 60 cm.
Ÿ
The rubber hose must have CE identification and must be heat resistant between -20ºC and +80ºC.
Use propane, butane or propane-butane mixtures.
Product characteristics/ Specifications
A. Model and characteristics
The product is a transportable patio/ garden radiant heater with gas bottle housing and stainless steel radiation shade with
heat radiation from the reflector.
B. Specifications
Ÿ
Only for usage outdoors
Ÿ
Weight: ca. 22 kg
Ÿ
Height: ca. 2220mm
Ÿ
Diameter of main jet: ca.1.7 mm
Ÿ
Diameter of flame jet: ca.0.22 mm
C. Destination countries, pressure