background image

Empava Gas Rangetops

15

SURFACE BURNER IGNITION

To ligh he top burners, push and turn the appropriate control knob counter clockwise to the “HI”
posi on. You will hear a clicking noise the sound o he electric spark igni ng the burner. Once burner
igni on has been achieved, then turn the burner control knob to adjus he desired heat se ng.

NOTE:

When one burner is turned to the “HI” posi on, the burner igniters will park. Do not a emp o

disassemble or clean around any burner while another burner is on. Do no ouch any burner cap,
burner base, or igniter while the igniters are sparking.

FOR THE MODELS WITH GRIDDLE
Before Using the Griddle

1. Clean the griddle thoroughly with warm, soapy water to remove dust or any protec ve coa ng.
2. Rinse with clean water and wipe o

o dry with so , clean, lint-free cloth.

3. A stainless steel cover tha s sized to fit on top o he surface when the griddle is not being used is
provided. Please note tha he cover must be removed before turning the griddle on.
4. Make sure the grease tray is under the front edge o he griddle. Posi on the tray under the griddle
overhang to catch grease or food residue.

Use o he griddle

1. Push and turn the control knob counter-clockwise to the preferred cooking temperature.
2. Prehea he griddle for 10-12 minutes.
3. When the griddle is preheated to the desired temp., the indicator light will turn on.
4. Bu er or cooking oil can be added for more flavor, then plate the food to cook.

The surface o he griddle is hot a er use. Please allow sufficien

me for the griddle to cool prior to

cleaning.

Summary of Contents for EMPV-30GC30






















Reviews: