33
CHANNEL MEMORY ~ M1/M2/M3/M4
The CB can store and recall, when necessary, 4 channels previously stored in the
memory.
To store or recall a channel into the memory, use the following procedure.
• Select the channel with the appropriate control or the
UP
/
DOWN
buttons
on the microphone.
• Push the
F
button : the display will show
.
• Press and release
M1
button for recall memory channel.
• Press and hold the
M1
button during 2 seconds. The unit will store a new
memory, you will hear a « BEEP » and the display will show
.
11)Lock button
it allows you to lock / unlock the key buttons.
12)PTT (push to talk):
Depress this knob to transmit a message and release to listen to an incoming
communication.
A) DC-POWER TERMINAL (13,2 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL S-METER JACK (Ø 2,5 mm)
D) EXTERNAL SPEAKER JACK (8
Ω
Ω
Ω
Ω
Ω
, Ø 3,5 mm)
FREQUENCY BAND SELECTION
The frequency bands must be chosen according to the country where you
are going to operate. Do not use another configuration. Some countries
require user’s licence.
Procedure :
1. Switch off the unit.
2. Turn it on while pushing the
F
and
19/9
buttons at the same time.
3. Rotate the
Channel
knob and select the desired frequency band (See the
chart here below)
4. To stop your selection, press the
F
button.
NOTE :
In the EU/UK , you can select directly the EU or UK band by pushing the
AM/FM button.
FREQUENCY BAND CHART
Digits displayed
Country
I
Italy 40 CH AM/FM 4 Watt
I2
Italy 34 CH AM/FM 4 Watt
D
Germany 80 CH FM 4 Watt/ 80 CH AM 1 Watt
D2
Germany 40 CH FM 4 Watt/ 40 CH AM 1 Watt
EU
Europe 40 CH FM 4 Watt/ 40 CH AM 1 Watt
EC
CEPT 40 CH FM 4 Watt
E
Spain 40 CH AM/FM 4 Watt
F
France 40 CH FM 4 Watt / 40 CH AM 1 Watt
PL
Poland 40 CH AM/FM 4 Watt
UK
England 40 CH FM 4 Watt English frequencies
EU/UK
Europe 40 CH FM 4 Watt + England 40 CH FM 4 Watt
English
Summary of Contents for Ninja
