background image

6

7

Congratulations! 

On your purchase of the EMPHASER subwoofer system dedicated for Mercedes-Benz 

vehicles. If you plan on installing this speaker system by yourself, please read the following 

instructions carefully before you attempt the installation. 

For any further information about this product, please contact your authorized EMPHASER 

dealer.

 

SET CONTENT

Carefully remove the loudspeakers, crossovers and the accessories from the gift box and 

check whether all parts are in good undamaged condition, and match with the set contents 

listed below:

 

■ 1 subwoofer

■ 1 lowpass crossover

■ 1 manual

ASSEMBLY

 

This set is compatible with a variety of Mercedes-Benz vehicles. For step by step instructions 

on how to disassemble the original loudspeakers of your specific vehicle correctly, please 

contact your Mercedes-Benz service workshop. The following instructions for the C205 

model are to serve as an example for all models.
Carefully pull the sill cover up; it is just plugged. Start from the side of the B-pillar and work 

your way forward.
Remove the cover under the glove compartment. It is fixed in the front area with two screws 

and in the rear with some clips. Finally, disconnect the cables from this cover.
In this model the carpet ends just in front of the seats. Pull the carpet out this side first, then 

pull it up and out the door.

Remove the footrest by loosening the nuts (rectangle).

Remove the three screws marked with a circle to facilitate access to the original subwoofer.

1

Reviews: