41380-0-0120
Page 22
BARRIER SCREEN INSTALLATION
NOTICE:
Do not handle barrier screen or door assembly with
your bare hands! (Always Wear Gloves)
1. Grasp and hold the barrier screen assembly at an angle as
shown in
Figure 21.
Insert the top of the barrier between the
surround and fireplace insert top frame.
Figure 21
2. Raise the barrier just enough to allow the bottom of the
barrier to swing inward to a vertical position.
See Figure 22.
Figure 22
3. Once the lower return flange on the back of the barrier is
place against the glass door fame, gently lift the barrier
screen up about 3/8 of an inch, push inward on the barrier,
then release and lock the lower return flange between the
door glass and lower door frame.
See Figure 23.
Figure 23
