background image

38746-0-0118

Page 13

IMPORTANT SAFETY INFORMATION

For the Homeowner

 

This fireplace must be installed and serviced by your dealer 

or a qualified service technician. Other than cleaning the 

glass and replacing the light bulbs, there are no user-

serviceable components.

 

Keep the area around the fireplace clean and free of debris.  

This fireplace requires an unimpeded flow of air to circulate 

warm air. Do not place objects on or around the fireplace that 

may restrict air flow.  

 

Keep the area around the fireplace free of combustible 

materials – including drapery, upholstered furniture, paper, 

boxes, and clothing.  Never hang stockings or cards above 

the fireplace.  

 

Never operate the fireplace with the glass front removed or 

damaged.  Any part removed for cleaning or servicing must 

be replaced prior to operating the fireplace. 

 

The fireplace gets hot during operation and may remain hot 

for an hour after use.  When operated by thermostat, the 

fireplace will turn on and off automatically.  

• 

This fireplace may become hot enough to burn skin and 

ignite clothing after prolonged contact. To prevent injury, alert 

people in your home – especially children – to the hazards of 

high surface temperatures and warn them to stay away from 

the fireplace. 

• 

Supervise children whenever the fireplace is hot. Young 

children and others may be susceptible to accidental 

contract burns. Have your dealer install a physical barrier if 

there are at-risk individuals in your home. To restrict access 

to a fireplace or stove, install an adjustable safety gate to 

keep toddlers, young children, and other at-risk individuals 

out of the room and away from hot surfaces. 

• 

The vent cap, located on the outside of your home, will also 

become very hot. Alert everyone, adults and children, to stay 

clear and avoid touching the vent cap. Keep the area around 

the vent cap clear of combustibles, including shrubs and trees.  

 

Do not use this fireplace if any part has been underwater. 

Have a qualified technician inspect the fireplace and replace 

any part that has been underwater. In the event of a natural 

disaster (tornado, earthquake, fire, etc.) have a qualified 

technician inspect the fireplace for damage or potential gas 

leaks. Repair or replace any damaged components before 

operating this fireplace.

 

Never burn solid fuels such as wood, coal, paper or 

cardboard in this fireplace.

Annual Inspection

 

Have the fireplace inspected annually before use. 

• 

More frequent inspection and cleaning may be required if the 

fireplace is installed in an area exposed to pet hair or dust, 

or to excessive lint from new carpeting or bedding materials.  

 

During the annual checkup, the technician will 

 

□  

Inspect the pilot and burner system for proper operation  

  and replace any damaged parts

 

□  

Check the glass and gasket for proper seal

  □  

Check the barrier screen for fit and structural integrity

 

□  

Check all latches for proper operation and tension

 

□  

Inspect the log set or decorative media for debris 

 

or damage

 

□  

Freshen the glowing embers if necessary

 

□  

Replace batteries in the transmitter and receiver 

 

□  

Inspect the venting for damage or corrosion

 

□  

Inspect the vent cap for damage or obstruction

 

Also perform cleaning and inspection following any 

remodeling work in your home.

Summary of Contents for DVCT36CBP95N-1

















Reviews: