40946-0-1019
Page 17
Index No.
Part No.
Description
1
R-1268
Wire Assembly
2
R-896
Bushing (Three Required)
3
R-1156
Fan Control
4
DV-806
Switch Box
5
DV-807
Switch Box Cover
6
TH-111
Junction Box
7
R-1410
Bushing (Strain Relief)
8
R-285
Motor
9
R-587
Motor Cushion
10
TH-341
Blower Cushion
11
TH-356
Motor Support Assembly
12
R-319
Blower Wheel
13
TH-135
Blower Housing Assembly
14
R-315
Cord Set
DVB-1 For Direct Vent Wall Furnaces DV210 and DV215
OPTIONAL BLOWER INSTALLATION INSTRUCTIONS
Oiling the Motor
Oiling holes are provided on each end of the motor for oiling. The
blower should have five drops of #20 motor oil every 6 months.
Do not use machine oil.
Cleaning the Blower Wheel
In some areas, such as near bedrooms and on floors with a hard
surface, the blower wheel will be filled with lint very quickly. A visual
check of the blower wheel should be made after 30 days use. The
blower will run faster with a dirty wheel, but move less air. Remove
the entire blower and clean each blade of the wheel with a tooth
brush as often as necessary.
