background image

37410-0-0616

Page 3

THIS IS A HEATING APPLIANCE

DO NOT OPERATE THIS APPLIANCE WITHOUT OUTER CASING INSTALLED.

  Due to high temperatures the appliance should be 

located out of traffic and away from furniture and 

draperies.

•  Children and adults should be alerted to the hazards 

of high surface temperatures and should stay away 

to avoid burns or clothing ignition.

•  Young children should be carefully supervised when 

they are in the same room as the appliance.

•  Clothing or other flammable material should not be 

placed on or near the appliance.

•  Any safety screen or guard removed for servicing 

an appliance must be replaced prior to operating 

the appliance.

•  Keep burner and control compartment clean.  
• 

Installation and repair should be done by a 

qUALIFIED SERVICE PERSON.   The appliance 

should be inspected before use and at least  annually  

by    a  qualified  service  person.    More  frequent 

cleaning may be required due  to excessive lint from 

carpeting, bedding materials, etc.  It is imperative 

that control compartments, burners and circulating 

air passageways of the appliance be kept clean.

•  Do not 

put anything around the furnace that will 

obstruct the flow of combustion and ventilation air.

•  Do

 keep the appliance area clear and free from 

combustible material, gasoline and other flammable 

vapors and liquids.

•  Do

 examine venting system periodically and replace 

damaged parts.

•  Do 

make a periodic visual check of pilot and burners. 

Clean and replace damaged parts.

•  Do not 

use this heater if any part has been under 

water.  Immediately call a qualified service technician 

to inspect the heater and to replace any part of the 

control system and any gas control which has been 

under water. 

•  this furnace must not be connected to a chimney 

flue serving a separate solid-fuel burning appliance.

IMPORTANT SAFETY INFORMATION

Summary of Contents for GWT-50W









































Reviews: