INSTALLATION PROCESS
B.
Connect the Arch Frame
NOTE:
Please check
and reference the
Frame Figure.
1. Please connect the first and second group
of arches by using Female Horizontal
Connecting Tube (part No.6) and Bolt
M8*80mm (part No.15), there are 5 pieces of
female horizontal connecting tubes between
them. Which make the front door group arch.
(Please NOTE the direction of the bolt. DO
NOT install the bolt on the top of the truss
where the fabric will rest.)
2. By turn, connect the other group arches
by using Male Horizontal Connecting Tube
(part No.5) and Bolt M8*80mm (part No.15)
Please make the Horizontal Connecting
Tube under the arch frame, the roof cover
could be supported beautifully.
3. Install the Diagonal Bracing Tube (part No.7) by using Bolt M8*50mm (part No.16) and Bolt
M8*80mm (part No.15).
4. Finally install all the Plastic Plug (part No. 18 and No. 19) in the suitable tubes.