INSTALLATION PROCESS
D.
Duckbill Nail Installation
4. Finally adjust the frame and rope,
make sure the cover is binding and
smooth.
Insert the 12mm Steel Rod (part No.10) into one Duckbill Nail (part No.9) and use electric
hammer to sink the nail into the earth deeply. Then fix it to the lower of frame tube using U
bolts (part No.11). There are 6 duckbill nails.
NOTE:
DO NOT LEAVE THE ROOF COVER UNATTACHED UNDER ANY
CIRCUMSTANCES UNTIL THE FINAL ASSEMBLY AND TIGHTENING
HAS BEEN COMPLETED. THE PROCESS IS QUITE EASY, BUT SOME
TIGHTENING ADJUSTMENTS WILL BE NECESSARY TO PRODUCE A
FLAT, TENSIONED ROOF COVER. PLEASE ADJUST THE ROOF
COVER EVERY MONTH.