EMPORIA Vue, Installation Manual

Energy Monitor

200A Current Transfomers

50A Current Transformers

100-240VAC 1Ø, 50/60Hz, 0.041A

260VAC/0.3A

(Fusible resister: 10E, 1W, 5%, TH)

< 11 Watts

2.4 GHz 802.11b/g/n

-40° -122° F (-40° - 50° C)

0-80% RH

200A

1 m

26 mm

50A

1 m

10 mm

Technical Details

The Vue energy monitor and current transformers are considered a 

system designed for field installation in a switch enclosure as per 

section 312.8(B) of the 2017 National Electrical Code (NEC) 

regarding Power Monitoring Equipment. The Vue is considered a 

non-invasive load monitor (NILM) and as a non-permanent fixture, it 

is acceptable to install in an electrical panel.

I.T.E. Energy Monitor

E506714

The Emporia Vue Smart Home Energy Monitor contains FCC ID: 

2AS6P-EMCTV2 This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) this device 

may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause 

undesired operation. This equipment complies with FCC RF radiation 

exposure limits set forth for an uncontrolled environment. This 

equipment should be installed and operated with a minimum 

distance of 20 centimeters between the radiator and your body.

Caution: 

Any changes or modifications not expressly approved by 

Emporia void the user's authority to operate the equipment. 

Designed in Colorado, USA. Manufactured in India.

Power supply input: 

Fuse:

Power usage: 

Wi-Fi:

Operating conditions: 

Max current: 

Cable length: 

Inside diameter:

Max current: 

Cable length: 

Inside diameter: