The sound is dull and lacking in treble
- Double check that the
in 1 loading
trim pot isn't turned all the way
down. This would load down your guitar quite heavily and roll off a
lot of high end.
- This could also be the case if you're using an overdrive or
distortion pedal in the loop, and have the
noise filter
turned on. In
this situation, you may want to put your gain pedals before the
Stereo, or just use a bit of eq in the loop to bring back the
treble.
Boost won't turn on in AB or AY mode
- The Stereo is probably configured to accept an external
boost switch. If you are not using an external switch, see
Startup
Configuration
to disable the external switch.
The noise filter is making my signal noisier and/or brighter!
- Some modes require both
noise filter
switches to be set the same.
Try setting both
noise filter
switches to the same setting and see if
that resolves it.
Summary of Contents for buffer plus
Page 1: ...user manual...
