EMS SYSTEM 7000
7703 INSTALLATION, ISSUE V2.2 – 13/04/10
7
Switch
Switch On
1
Buzzer follows Alarm LED
2
Buzzer Follows Local LED
3
Buzzer sounds for 4 seconds in Clear and Test
4
Buzzer Follows Low Battery LED
5
Buzzer sounds when receiving any valid transmission with key in TEST
6
Buzzer follows RI LED (not with Key in TEST)
7
Buzzer sounds on mains fail
8
Buzzer follows Local LED but with 5 second delay
Table 4
2.9
Check all options, functions and relays operate correctly. The relays should operate as
shown in Table 5.
Transmitter Operation
Relay Operation
Green button pressed
Local relay operates.
Both side buttons pressed
Alarm, relay operates.
Table 5
2.10 Re-check 2.5.
2.11 Holding the front panel to the main body of the receiver add the 4 screws previously
removed.
