2
E
lectron
M
icroscopy
S
ciences
P.O. Box 550
1560 Industry Road Hatfield, PA 19440
TOLL FREE:
1-800-523-5874
TEL:
215-412-8400
WEB:
www.emsdiasum.com
FAX:
215-412-8450
EMAIL:
sgkcck@aol.com
PLEASE READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING
THIS PRODUCT.
AVOID EXPOSING THIS PRODUCT TO HIGH TEMPERATURES
AVOID USING THIS PRODUCT IN SIGNIFICANTLY DIRTY OR DUSTY AREAS
NEVER IMMERSE THE INSTRUMENT IN WATER OR IN ANY SOLVENT
DO NOT PUT ANY FOREIGN OBJECTS INTO THE FRAME OR INTO ANY MOVING PARTS
OF THIS PRODUCT
OPERATING TEMPERATURE IS 5°C TO 35°C
OPERATING HUMIDITY IS 20% TO 80% AT 25°C
Contents
Stand (1)
Optical head (1)
Focus mount (1)
10X eyepiece (2)
Eye guard (2)
Dust cover (1)
Instructions
When reading these instructions, please refer to the assembly picture and to the microscope drawing
(Figure 1).
1. Unpack the microscope (
NOTE
: Remove the base and frame assembly first).
2. Using three (3) hex bolts with lock washers, which are taped to Styrofoam under the base, stand
the black base on rend with holes closest to the bottom and attach the Pole assembly.
3. Attach the roller boom assembly to the Pole by inserting the black knob, which is taped to
Styrofoam under boom, in the boom assembly to tighten.
4. Install the focus mount assembly by unscrewing the collar on the chrome post and slide the focus
mount onto the post, securing the collar.
5. Assemble the microscope by placing the optical head in the focus mount, tightening the setscrew.
