Manual-EMT-928
9/13
Connection
1.
Connect the RCA output connectors with the phono input terminal your amplifier.
2.
Connect the GND-socket with the GND-terminal of the same amplifier. Use the GND cable delivered in the accessories box.
3.
Connect the IEC C14 socket to the mains. Use the power cable provided by your distributor.
4.
Switch on the internal charger.
The EMT 928 features a unique battery power system, which allows listening music while the turntable is fully disconnected from the mains. Charging of
the battery is controlled by an integrated micro-processor.
-
To prevent self-discharge of the battery, always keep the charger on while the turntable is not in use.
-
For best performance, switch the charger off while listening to the music.
1
3
4
1
