15
Care and Maintenance
Your S3 BTGPS receiver is a highly sophisticated piece of electrical equipment which
requires special care and maintenance. Please follow the suggestions below to
fulfill any warranty obligations and ensure you get the best performance possible
from your S3.
DO
Keep the S3 BTGPS receiver dry.
Exposure to rain and/or environments with high humidity will cause the receiver
to malfunction and create irreversible damage. Precipitation, humidity, and
other liquids contain minerals that can corrode the electronic circuit boards as
well as the connector, jack, and plug. Protective cases are available for the S3.
Please contact your retailer for more information.
Use/store the S3 at a temperature between 15°C (59°F) & 25°C (77°F).
Exposure to extreme hot or cold conditions, such as a closed car in summer or
winter, will affect the performance of the receiver and reduce both the capacity
and lifetime of the battery.
When not in use, store the receiver in a clean environment.
If left in an unclean environment, dirt and dust can enter the circuit board and
damage the receiver.
Clean with a soft, dry cloth.
Use of harsh cleaning solvents, chemicals or strong detergents will damage the
receiver.
Use only EMTAC branded chargers to charge the S3 receiver.
Use of any charger other than the one provided may damage the S3 and create
the risk of explosion.
Use only accessories approved for use with the S3.
Unauthorized accessories, antenna, modifications or attachments can damage
the S3, may void warranty, and violate regulations governing radio devices.
Keep the S3 and all accessories out of small children’s reach.