0
1.5 First Time Usage
1.5.1 Firmware Installation
For users who bought the player without a HDD inside, and want to install a SATA
HDD, please see 9.1 Firmware Installation for details.
1.5.2 Remote Control
First time usage of Remote control
Install the batteries before using the remote control, installation steps are as the
picture shows:
1.5.3 Power on/off, language control
1. Power on
After connecting the DC IN jack and turn on the POWER switch on the rear panel,
the player will soon enter standby mode, and the POWER indicator on the front panel
will turn red. Press the STANDBY button on the front panel or remote control to wake
up the system, wait for a couple of seconds to enter the system and the POWER
indicator will turn blue.
2. Power off
In playback and other interfaces, press the STANDBY button on the front panel, the
player will enter standby mode. Then turn off the POWER switch on the rear panel to
cut off the power supply.
3. Language control
The system language of this player can be set to English or other languages.
Change the language you wish in the setup menu, the selected language will take
effect immediately.