Emtec POWER PLUS Series Installation Manual Download

Page: 3 / 6

2 : Remove the HDD

Consult the computer’s manufacturer user manual to locate and remove the original HDD. In most

cases, it is necessary to unscrew and remove the side or bottom panel.

Warning!

Static electricity is potentially dangerous to the various electronics components of your computer

during the installation of the SSD. To protect your computer from possible static electricity damage,

we recommend that you touch a metal part of the computer chassis to discharge static electricity

from your body and put yourself at the same electrical potential as your computer.

Summary of Contents for POWER PLUS Series

Page 2: ...the computer for the installation of the SSD After turning off the computer disconnect the cables Power supply Network Display keyboard Press the power button about 5 seconds to discharge the residual electricity 2 ...

Page 4: ... original HDD has a bracket or adapter disassemble it then attach it to the SSD This support or this adapter may contain fastening screws Consult the computer s manufacturer user manual to properly attach the bracket or adapter to the SSD 1 4 2 3 ...

Page 5: ...4 Mounting the SSD in the Computer Insert the SSD into the PC at the original HDD slot according to the computer s manufacturer user manual fixing screws disc locking by a mechanical system etc 5 ...

Page 6: ...Computer Close the PC and remount all components in their initial position in accordance with the manual Plug in the cables Power supply Network Display keyboard etc and your PC is ready to use your new EMTEC SSD 6 ...