EMTRON EIC USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD APRIL 2018
15
Figure 4.1. EIC16M connected to the CAN Bus
4.12 ECU CAN Configuration for Single Device
Next step is to configure an ECU CAN channel, allowing the ECU to decode the EIC CAN
packets.
For this example, CAN 1- Channel 4 has been selected.
1.
Set “Enable" to 1(ON)”
2.
Set "CAN Base Address" to the Base Address shown in Figure 4.0 / 4.1. In this
example select 718 for EIC10 or 705 for EIC16M.
3.
EIC10
. Set "DATA Set" to 73 (EIC10 1x Device). See Figure 4.2
EIC16M
. Set "DATA Set" to 69 (EIC16M 1x Device). See Figure 4.3
Figure 4.2. EIC10 CAN Configuration
Figure 4.3. EIC16M CAN Configuration
