Operating instruction for collet holder
Type Softsynchro
®
/ PGR
Edition: 01.04.2012
11
®
3 Maintenance
3.1 Maintenance schedule
What?
When?
Who?
External cleaning
Periodically, depending on the degree
of dirt
Operator
3.2 External cleaning
Before clamping please make sure the collet holder is oil-free in the area of the
powRgrip
interface, same for collet and tool shank. Eventually clean these
components as described in the cleaning directions, chapter
2.6.1, page 9.
4 Storage when not in use
If the collet holder is taken out of service, please go through the following steps:
-
Clean the collet holder with a duster.
Important:
Do not use any aggressive solvent.
Do not use fibrous materials i.e. steel wool.
-
Spray the collet holder with preservation oil to avoid rusting.
Important:
Before storage, all evidence of coolant and machining residues must be
removed!
