LightPulse Fibre Channel PCI Host Adapter Management
Page 6 of 7
file://E:\emuweb\WWWROOT\ts\fibre-channel\docs\manage pdf\7pt_util.htm
3/24/99
Enable –SLI-1 is used even if the adapter is capable of SLI-2.
Disable – The driver will use SLI-2.
Maximum Number of LUNs
This is the number of LUNs the driver will poll during device discovery. The minimum
value is 1, the maximum value is 255.
Maximum Queue Depth
The number of outstanding commands to a single LUN.
Return to top of page.
Adapter Timer Settings
E_D_TOV
This parameter changes the Error Detect Timeout Value,
AL_TOV
This parameter changes the Arbitrated Loop Timeout Value,
R_A_TOV
This parameter changes the Resource Allocation Timeout Value
ARB_TOV
This parameter changes the Arbitration Timeout Value.
Static Poll Destination Address
The Static Poll Destination Address lists a 24 bit Fibre Channel address that will be polled
for devices when the adapter boots. To add an address, enter the 6 hex digits of the Fibre
Channel address in the Address box and click the Add Address button. To delete an
address, select the address and click the Delete Address button.
