LightPulse Fibre Channel PCI Host Adapter How to...
Page 9 of 11
file://G:\emuweb\WWWROOT\ts\fibre-channel\docs\howto pdf\index.htm
3/28/99
Windows NT 4.0 IP driver
From the Windows NT desktop,
1. Click Start button, select Settings, and click Control Panel.
2. Double click the SCSI Adapters icon.
3. Select Drivers tab.
4. Click Remove, and Yes to confirm.
5. Click OK.
6. Reboot the computer to restart Windows NT.
Return to top of page.
Remove existing AIX driver
Select one of the previously released versions of the AIX SCSI/IP driver.
Prior Version Driver Name
1.0.0.0
df10e51a
2.0.0.0
lp6000
Versions Below 2.0.0.0
1. Login as root.
2. Open terminal window and type this command to uninstall old driver:
# installp -u devices.pci.df10e51a
3. Type this command to remove the network interface (fcnet):
# rmdev -dl fcnet
n
where
n
is the network device driver (interface) number. A message should appear
showing device not found.
4. If the debugging program bosboot has been run previously, enter,
# bosboot -a -d /dev/ipldevice -D
