KPX 100 Instuctions.doc Rev 1.6 7/10//2018
(B)
DOOR SENS
a) Door Auto Relock – the system will
immediately re-lock the door after a valid
access has been gained to prevent “tailgate”
entry.
b) Door Forced-open alarm – The keypad will
generate an instant alarm if the door is
forced to open. Enable the function with
Program Option 801
c) Door Propped Open Alarm – The keypad
will generate an alarm if the door is left
open longer than the pre-set time. Enable
the function with Program Option 9 with
duration of 1 to 999 seconds.
With the help of a normally closed door
d) Inter-lock Control – When the door is open
Position sensor (usually a magnetic door
the inter-lock output of the keypad will give
switch) on the door to set up the following
a (-) command to de-activate the other
functions.
keypad in an inter-lock system.
Pg 17
Summary of Contents for KPX 100
