PRODUCT DESCRIPTION
smart Econ - emz-HCW - 180116
11
Product description
The smart Econ heating system controller was especially developed for single-family houses and
apartment buildings.The goals are the creation of optimum comfort for residents and the greatest
possible ease of use for the system operator.
The smart Econ heating system controller can be operated either via the 4 buttons and the rotary/
push button on the control panel or optionally via existing internet access using a PC, smartphone or
tablet.
The smart Econ heating system controller is a modern system to control the entire domestic technol-
ogy of single-family houses and apartment buildings.
As many components of domestic technology can be integrated into one single system, there are
many options for system optimization (e.g. energy efficiency, ease of operation, optimization of com-
fort and maximum coziness).
Outdoor temperature-controlled room heating
When delivered, the controller is designed for purely outdoor temperature-controlled systems.
Depending on the outside temperature, control valves regulate the flow temperature of the respec-
tive control circuit according to the set heating curve.
A smart Econ room controller can also be used for remote adjustment.The room temperature influ-
ence can be set as an additional reference variable by connecting the room controller.
To take solar radiation into account, several room controllers can be attached (e.g. to separate the
heating circuits on the north and south side).
Self-adjustment / heating behavior
Optionally, heating behavior can be influenced by using a smart Econ room controller.
The inertia of the room is initially assumed to be "average" and later adapted in a learning phase of
about 3 days, during which the desired progression of the room temperature is compared with the
actual development in the main room.In most cases, the optimum setting is found after 3 days.Of
course, this adjustment can be repeated at any time.
This way, heating operation is optimized in terms of comfort, homeliness and energy consumption
independently of the type of heating (underfloor heating system, wall heating or any combination
thereof).
Control of heat generators
In general, all types of heat generators (gas, oil, solid fuel, district heating, heat pumps, ...) can be
integrated into the smart Econ system control.
The heat generators are either enabled by a smart Econ room controller when heat is required or
controlled according to the heat demand flexibly depending on outdoor temperature or constantly
based on tank temperature etc.
The objective of this is to achieve the longest possible switching intervals to minimize the exhaust
emissions by reducing the number of startups and at the same time to increase the heat generator's
service life.
