SETTINGS DURING OPERATION
smart Econ - emz-HCW - 180116
23
Settings during operation
Entering the access code
To prevent settings from being changed accidentally, it is necessary to enter an access code for the
smart Econ heating system controller.
In the overview menu (page 19) you can call up the main menu:
• Select ›MENU‹.
You have to enter the access code.
• Enter the access code for the end user (Code: 0000), if necessary.
• Press the turn knob to confirm.
The main menu is now available. “Main menu” on page 26
Depending on the access code, the corresponding menu items appear.
Change values
• Select the value to be changed (e.g. code or temperature) by turning the rotary/push button (high-
lighted).
• Press the rotary/push button to change the value.
• Use the function keys 2 (
<
) and 3 (
>
) to select the digit of the number to be changed (underlined).
Example code: 0000
• Press and turn again to increase or decrease the value.
Example code: 0004
• Press the rotary/push button to confirm the value.
• Repeat the procedure for further digits of the number, if necessary.
NOTE
The Userinterface does not display any submenus that are not
needed by the selected hydraulic system or the activated
options.
Hello user
<
PLEASE ENTER YOUR CODE
>
0000
