78
Malfunction
The screen on top right shows
the ›Attention‹ symbol which
points out a notification or an
operating malfunction.
Select via ›OK‹.
If ›Safety function‹ appears in
the display, this is a message,
no malfunction.
In this case, there is no deficiency,
but limits have been exceeded.
The controller indicates that a
protective function has been
triggered.
The message is only active until
normal operation has been restored.
Note!
If a malfunction message appears in the display, the operator
can define the possible causes by means of the Service Wizard
so that he/she can provide the fitter with precise information.
System 11
25.08.2012
10:32
Safety function
Solar circuit
emergency cut-off
1.10 Service Wizard
25.08.2012
10:32
Summary of Contents for smart Sol plus
Page 1: ...Equipment Excellence ...
Page 7: ...7 Dimensions 218 mm 51 mm 109 mm dmax 5 9 mm 109 mm 140 mm 30 mm 48 mm 218 mm 5 mm ...
Page 56: ...56 ...
Page 113: ......
