IMPORTANT INFORMATION
8
smart Stove - 0142 - 42WMSUGAT2-C
Keep these Assembly and Operating Instructions and all reference documents so that they are
available if required.
When relocating or when selling the device, hand the documents over to your successor.
Intended use
The differential temperature controller smart Stove may be used exclusively for controlling heating
and water temperatures for use with hydrophilic wood log and pellet stoves in combination with one
or more buffer tanks.
It must be operated within the scope of all the specifications described.
Installation and set-up of the controller may only be performed by specialists.
The installer must have read and understood the operating manual. The installer explains all the rel-
evant functions to the operator.
For operation, it is essential that the housing is closed and free of damage.
NOTICE
The installer installing the controller must inform the plant
operator about operation, functioning and the method of action
of the smart Stove!
NOTICE
The device in operation may only be made accessible to adults
disposing of appropriate knowledge and experience!
NOTICE
Make sure that only a dry or slightly moistened cloth is used for
cleaning and servicing of the housing, the control elements
and the display.
The surfaces must never get into contact with cleaning prod-
ucts or solvents - mat, brittle or slightly dissolved plastic parts
must be replaced immediately!
A device with damaged housing must not be operated!
