4.5 Port Security
4.5.1 Static Address Latch
Static MAC address is to limit computer operation, the computer with binding computer MAC and
ports can not communicate with other ports, while other computers can.
On the [Port Security / Static Address Lock] page it displays switch information of static address
latch, as shown below:
Configuration Guidelines:
For example, when binding the port 10 of Switch A with Switch B, port 1 belongs to VLAN20.
• Enable static address latch function of Switch B
• Enter the MAC address of Switch B
• Enter VLAN ID as 20
• Enter port with 20
• Click <Save>
• Operation finished.
All Rights Reserved © 1997 - 2017 Enable-IT
™
, Inc. Page
!
of
!
29
49
PARAMETER
DESCRIPTION
MAC ADDRESS
Static MAC address differs from the general dynamic MAC address. Once a
static address is added, the address will remain in effect until it is deleted and
free the maximum aging time limit.
VLAN ID
Port-corresponding VLAN ID number
PORT
Select a status MAC address to forward port, you can only specify one
forwarding port.
This feature is a security mechanism which requires high attention to the settings:
1) Do not use a multicast address as an entered address
2) Do not enter the reserved MAC address, such as the local MAC address
3) Port which has already been added to an aggregation group is not allowed to set
binding function between port and MAC address
Caution
