Introduces a child to the world of cause and effect. Simply press
your capability switch and create a swirling blend of colors and
music, and watch as the fish spin around. Encourages visual
attention and enhances auditory skills. Size: 9"L x 8"W x 9"H.
Requires 5 AA Batteries. Weight: 1½ lbs.
Operation:
Operation:
Operation:
Operation:
1.
Press & Glow Spinner requires five AA batteries. Use alkaline
batteries only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform properly.
Never mix old and new batteries together or different brands or
types together.
2.
Gently turn the unit over to reveal the black battery
compartments. Carefully remove the small screw from the
battery compartment covers using a Phillips head screwdriver,
and slide the covers off. Observing proper (+) & (-) battery
polarity, install batteries into the holders. Replace
compartment covers and screws.
3.
Connect the Press & Glow Spinner to any external capability
switch via the jack, located on the base of the unit. The Press
& Glow Spinner is equipped with a 1/8-inch jack, for use with
capability switches with a 1/8-inch plug. If you need to use a
1/4- to 1/8-inch adapter use our No.1170 adapter. If
purchased elsewhere, it must be a mono adapter, not stereo.
4.
Now actuate your external capability switch to create a swirling
blend of colors and music, and watch as the fish spin around.
Encourages visual attention and enhances auditory skills.
5.
The Press & Glow Spinner will only continue playing while the
external capability switch is actuated. Once you release the
switch, the Press & Glow Spinner will stop.
Important Note:
Important Note:
Important Note:
Important Note:
The push down spinner top has been disabled for manual use; the
Press & Glow Spinner can only be operated with the use of a
switch. Trying to use it manually will cause damage to the Press &
Glow Spinner.
Troubleshooting:
Troubleshooting:
Troubleshooting:
Troubleshooting:
Problem:
Problem:
Problem:
Problem: The Press & Glow Spinner does not spin and/or there is
no music.
Action #1:
Action #1:
Action #1:
Action #1: Rotate (spin) the batteries within the battery
compartment to ensure a good connection. Check that all batteries
are installed properly.
Action #2:
Action #2:
Action #2:
Action #2: Check all batteries for freshness, if weak or dead
replace with new batteries. Use an alkaline battery (E.G. Duracell
or Energizer brand).
Action#3:
Action#3:
Action#3:
Action#3: Make sure that you have plugged your switch in all the
way. There should be no gaps.
Action#4:
Action#4:
Action#4:
Action#4: Try your external capability switch with another
toy/device to rule out the switch as the source of the problem.
Care of the Unit:
Care of the Unit:
Care of the Unit:
Care of the Unit:
The Press & Glow Spinner can be wiped clean with any mild
household multi-purpose, non-abrasive cleaner and disinfectant.
We recommend Simple Green, which is a non- toxic biodegradable
all-purpose cleaner.
Do not use abrasive cleaners, a
Do not use abrasive cleaners, a
Do not use abrasive cleaners, a
Do not use abrasive cleaners, as they will scratch the surface
s they will scratch the surface
s they will scratch the surface
s they will scratch the surface
of the unit.
of the unit.
of the unit.
of the unit.
Do not submerge the unit, as it will damage the electrical
Do not submerge the unit, as it will damage the electrical
Do not submerge the unit, as it will damage the electrical
Do not submerge the unit, as it will damage the electrical
components
components
components
components
Rev
Rev
Rev
Rev 1/
1/
1/
1/31
31
31
31/1
/1
/1
/17
7
7
7
