PETROL VIBRATING SCREEDS “HURACAN” TYPE
5
en
3
USAGE CONDITIONS
WARNING!
READ AND UNDERSTAND EVERY INSTRUCTION.
WORKING AREA
KEEP your working area clean and well lit. Cluttered benches and dark areas invite accidents.
DO NOT OPERATE power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
KEEP AWAY from standers, children, and visitors while operating a power tool. Distractions can
cause to loose control.
PERSONAL SAFETY
STAY ALERT, watch what you are doing and use common sense when operating a power tool.
DO NOT USE THE TOOL while tired or under the influence of drugs, alcohol, or medication.
DRESS properly.
DO NOT WEAR loose clothing or jewellery.
CONTAIN long hair.
KEEP your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair
can be caught in moving parts.
REMOVE adjusting keys before turning the tool on.
DO NOT overreach.
KEEP properly fed and balanced at all times.
USE safety equipment.
ALWAYS WEAR eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
TOOL USE AND CARE
USE clamps or other practical way to secure and support the work piece to a stable platform.
DO NOT FORCE the tool.
USE the correct tool for your application. The correct tool will do the work better and safer at the rate
for which it is designed.
STORE idle tools out of reach of children and other untrained persons.
MAINTAIN tool with care. KEEP cutting tools sharp and clean.
CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tools operation. If damaged, have the tool serviced before using again.
USE only accessories that are recommended by the manufacturer for your model.
SERVICE
Tool service MUST BE PERFORMED only by qualified repair personnel.
When servicing a tool, USE only identical replacement parts.
FOLLOW instructions in the Maintenance section of this manual.
SPECIFIC SAFETY RULES
For your own safety,
as well as for the others one, and in order not to cause any damage to this
equipment, please read carefully the instructions
that are explained as follows:
1.-
For the proper use of this device, please assure that the operator has been correctly informed
of the content of this manual before using it.
2.-
This screed must be used only under the applications for which it has been designed and
according to these safety instructions.
3.-
Do not touch any part of the vibrating group when the motor is running.
4.-
Do not work in an area exposed to flammable liquids or gases.
5.-
Do not allow inexperienced or not trained personnel to use the screed alone.
6.-
Always keep the vibrating screed clean and dry.
7.-
Please secure all the threads and bolts before working.
Summary of Contents for HURACAN GH
Page 2: ......
