DOUBLE POWER TROWELS TIFON908
en
10
4
TROWEL FINISHER SERIES-INSTRUCTIONS
Putting into Service. Before packing and shipping, this Power Trowel was run and tested at the factory. If
there are any problems, please let us know.Before putting your new finisher into service, read all manuals
and instructions carefully, Improper setup, use or maintenance of your equipment could result in personal
injury or damage to equipment.The purpose of this section of the manual is to explain the intend setup, use
and maintenance of this equipment.
ASSEMBLY
VLD836 ride-on trowel is fully assembly in the factory. No need to assembly anything by end user but the
movement handles.
DO NOT LIFT THE MACHINE BY GUARD RINGS.
BEFORE STARTING
Read and follow the engine operation manual before running.
1. Add fuel and water into the tank.
The tank on the left is for fuel, the
one on the right is for water.
2. Connect the battery wire. Red
wire is to positive, black is to
negative.
3. Add the oil to engine according to the engine manual. And check the
gear-box oil level.
4. Check the stop panel working properly.
5. Adjust the seat to the comfortable position for the operator.
