WEP Key:
To disable WEP security, click on the “Disable” option. To enable
WEP security, there are 2 types to select – 64bits and 128 bits. When it is
selected, the key value must be entered in ASCII or HEX format.
Note:
When WEP security is enabled, all the wireless clients that wish to
connect to the Access Point must also have WEP enabled with the identical
WEP Key value entered.
Apply
: For the changes made to any of the items above to be effective, click
“
Apply
”. The new settings are now been saved to Access Point and will be
effective once the Access Point restarts.
If
WPA-PSK
is enabled, user needs to set the key in the passphrase field as the
below screen. The key length should be 8 characters at least.
Note:
Once
WPA-PSK
function enables, it will take some time to make the
setting active.
11
Summary of Contents for 54MBPS WIRELESS LAN POCKET ACCESS POINT
Page 1: ...54Mbps Wireless LAN Pocket Access Point USER MANUAL...
Page 23: ...Now the main menu screen is popup 20...
Page 41: ...PPPoE with a fixed IP address 38...
Page 42: ...PPTP 39...
