Mar/07
MN
10
Press
Y
to confirm.
7.
Select
Rebuild Raid 1 Set
, press
Enter
.
8.
When asked
Are you sure(Y/N)?
, press
Y
confirm. The mirror
will begin rebuilding. Do not interface with process.
9.
When rebuilding is finished, press
Ctrl+E
.
10.
When asked
Are you sure to exit(Y/N)?
, press
Y
to exit and
reboot.
Deleting RAID Arrays
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter
the RAID BIOS.
2.
Select
Delete RAID Set
, then press
Enter
.
3.
Select the RAID set then press
Enter
.
4.
When asked
Are You Sure(Y/N)?
, press
Y
to confirm.
Resolving Conflicts
When a RAID set is created, then metadata written to the disk includes
drive connection information. If, after a disk failure, the replacement
disk was previously part of a RAID set (or used in another system), it
may have conflicting metadata. If so, this will prohibit the RAID set
from being either created or rebuilt, in order for the RAID set to
