Mar/07
MN
12
controller in another PCI Express slot. During this (POST) process, the
BIOS will show up and indicate the devices attached to it.
Driver Installation
For Windows® XP/Server 2003
For New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “
Driver\x86” folder, found on the driver CD, onto a blank floppy
disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
Restart the computer when prompted by Windows’ installation.
4.
At the Windows Setup screen, press
F6
to install the RAID driver.
5.
When prompted, press
S
to specify the location of the driver.
6.
Insert the floppy disk, then press
Enter
.
7.
Select
Silicon Image SiI 3132 SoftRAID 5 Controller for
Windows XP/Server 2003
, then press
Enter
.
8.
Press
Enter
to finish driver installation, then follow the on-screen
instructions to complete the Windows installation.
Note:
If the
Security Alert
warning pops up, click
Yes
. Our driver has
