Mar/07
MN
5
down firmly, but gently, until it is well seated.
6.
Replace the slot bracket’s holding screw to secure the card.
Device Connection
Serial ATA hard drives should come with their own accessories. In
most cases, you just need to power up the device and connect them to
the ports. The Encore SATA2 RAID PCIe Card is two channel Serial
ATA controller that supports two Serial ATA hard disk drives. It is
recommended to use identical drives for all RAID configurations.
However, it’s possible to combine hard drives of different sizes and
makes.
RAID Arrays
RAID Arrays are setup in the SiI 3132 SATA PCIe RAID adapter’s
BIOS.
RAID 0 (Striping)
This RAID array to be used on
New/Blank
hard drives. Striping will
destroy existing data on the hard drive.
Auto Configuration
is
recommended. For applications that require custom chunk size,
Manual Configuration
is offered.
