8
options is selected, it is required to select the
Authentication mode
from the next
dropping list. If
WPA
is selected, configuration is enabled.
Please click the
“
configuration”
. The below window is pop up. Then, please select the certificate
that user wants to use and enter the server name and login name
If WPA-PSK is selected, click the configuration button. The popping window is as
the below. Please enter the key.
Auth. Mode:
There are three modes available to choose.
Open Authentication
– the sender and receiver do not share secret Key for
communication. Instead, each party generates its own key-pairs and asks the other
party to accept it. The key is regenerated when the connection is established every
time.
Shared Authentication
– the sender and receiver shares the common key for
data communication, and the key is used for extended length of time.
Auto
– depend on the communication to establish, and automatically use the
proper authentication mode.
The following will only be activated to allow for configuration when
Encryption
is
enabled.
Default Key:
select one of the 4 keys to use.
