Security IP- IP Filter Setting
The Security IP function provides access management by IP address filtering. There
are three modes for the IP filter.
1.
Disable: Disable the IP Filer function. All IP addresses are allowed to access the
device.
2.
Allowed: Setup the IP addresses that are allowed to access the device. Only the
configured IP addresses have the right to access the device.
3.
Denied: Setup the IP addresses that are denied to access the device. The IP
addresses that are configured are not allowed to access the device.
Tip:
For example, to prevent the IP address “192.168.1.3” from connecting with the
device:
1.
Select “Denied” From the “IP Access Check” drop list.
2.
Fill the IP address “192.168.1.3” in the IP Address 1 box.
3.
Click “Apply” to execute your configuration.
44
