14
www.encore-usa.com
1.
This step will give you an option to
scan for TV channels. Select which
signal source you are connected to in
the “TV Scan Type” line then click
“Search”. There are two types of
scans.
I. One is scan by TV channel table
“Cable”, “Antenna” and “Extend”
II. One is scan by frequency that scans
low frequency to high frequency. The
“Auto” scan mode is not for the TV
table order.
2.
Select the video signal format in your
area (NTSC or PAL) from the “TV
Tuner Standard” drop-down menu.
3.
Click “Finish”.