www.encore-usa.com
20
4. Soft-AP
Function
Except becoming a wireless client of other wireless access points, this Wireless LAN Utility
can acts as a wireless service provider. You can switch the operating mode to “Access
Point” mode to simulate the function of a real wireless access point by software, and all
other computers and wireless devices can connect to your computer wirelessly, even
share the internet connection you have.
To have the ENUWI-22N4 wireless N300 USB adapter to bridge your wired and wireless
network, the following requirements must be met
:
1. The ENUWI-22N4 USB Adapter must be installed on a computer connected to the wired
network.
2. Either configure network sharing or bridge the two interfaces (wireless and wired) on the
computer.
3. Set the wireless station’s IP address to be in the same subnet as the computer in which
the ENUWI-22N4 wireless N300 USB adapter is installed.
Turn Your Computer into a Wireless Router in AP Mode
Refer to Windows “Internet Connection Sharing” for this function.