background image

Europe – EU Declaration of Conformity 

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been 
applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: 
 

EN60950-1: 2006 

Safety of Information Technology Equipment 
 

EN 62311: 2008 

Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300GHz) 
 

EN 300 328 V1.7.1 (2006-10) 

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment 
operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements 
under article 3.2 of the R&TTE Directive 
 

EN 301 489-1 V1.8.1 (2008-04) 

Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio 
equipment and services; Part 1: Common technical requirements 
 

EN 301 489-17 V1.3.2 (2008-04)  

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio 
equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN 
equipment 
 
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, 
except in France and Italy where restrictive use applies. 
 
In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device 
for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. 
 
This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 
mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum 
authority in France. 
 

0560

 

 

[Jméno výrobce]

 tímto prohlašuje, že tento 

[typ za

ř

ízení]

 je ve shod

ě

 se základními požadavky a dalšími 

p

ř

íslušnými ustanoveními sm

ě

rnice 1999/5/ES. 

Č

esky [Czech] 

Undertegnede 

[fabrikantens navn]

 erklærer herved, at følgende udstyr 

[udstyrets typebetegnelse]

 overholder de 

væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. 

Dansk [Danish] 

Hiermit erklärt 

[Name des Herstellers]

, dass sich das Gerät 

[Gerätetyp]

 in Übereinstimmung mit den 

grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG 
befindet. 

Deutsch 

[German] 

Käesolevaga kinnitab 

[tootja nimi = name of manufacturer]

 seadme 

[seadme tüüp = type of equipment]

 

vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. 

Eesti [Estonian] 

Hereby, 

[name of manufacturer]

, declares that this 

[type of equipment]

 is in compliance with the essential 

requirements and other relevant provisions of Directive 1999/5/EC. 

English 

Español 

[Spanish] 

Por medio de la presente 

[nombre del fabricante]

 declara que el 

[clase de equipo]

 cumple con los requisitos 

esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. 

ii 

Summary of Contents for ENUWI-N4























Reviews: