Endace Measurement Systems Limited
http://www.endace.com
EDM01.05-12r1 DAG 3.7T Card User Manual
Copyright, all rights reserved.
22
Version 6. 22 September 2005.
3.9 Configuring ATM Channels
, continued
In this section
This section covers the following topics of information.
•
Configuring DAG 3.7T Card for Receive and Transmit
•
Timeslot Connection ['c']
•
Delete Connection ['d']
•
Hyper-channel Connection ['h']
•
Line Connection ['l']
•
Sub-channel Connection ['s']
3.9.1 Configuring DAG 3.7T Card for Receive and Transmit
Description
Ensure the DAG 3.7T card has the appropriate transmit firmware image
loaded.
3.9.2 Timeslot Connection ['c']
Description
A simple connection is a connection which occupies only one timeslot on
one interface. The line would look like:
c bit_offset ifc_num ts_num
The
bit_offset
field is always
0
, it is reserved for future use.
In order to configure a connection on interface 5, timeslot 16 it would look
like:
c
0 5
16
0 5
16
3.9.3 Delete Connection ['d']
Description
In order to delete a connection, the connection must already exist. This is
used with
dagchan
. When
is started there are no connections, so
all connections to be created and deleted must exist in the .
cfg
file. This
line would look like:
d conn_num
To delete connection number 17:
d 17
